Infection control5 min read · 3 references
Working safely with disinfectants: dilution, contact time and ventilation
The right dilution, the full contact time and the right protection make disinfectants work and keep staff safe. What to check before you start.
A disinfectant works only when it is used as intended. Most failures come from three simple errors: the wrong dilution, too short a contact time, or a surface that was not cleaned first.
Dilution
- Read the label: the dilution depends on the use, such as surfaces or instrument immersion.
- Measure with a clean measuring cup or dispenser; do not guess.
- A weaker solution may not work; a stronger one wastes product and can damage surfaces or irritate skin and airways.
- Prepare solutions as directed, label the container and respect the stated use period.
Contact time
The surface or instrument must stay in contact with the product for the full time on the label. On surfaces this means staying visibly wet; for instruments it means complete immersion for the stated time.
Know the hazards
- Alcohol-based products are flammable. Keep them away from flames, sparks and hot surfaces, and let surfaces dry before switching on electrical equipment.
- Chlorine products must never be mixed with acids, ammonia-containing products or other cleaners, because toxic gases can form.
- Aldehydes such as glutaraldehyde give off irritating vapour. Use them in well-ventilated areas and in covered containers.
- Concentrated oxidisers and concentrates can irritate skin and eyes.
Personal protection
Wear gloves suited to the task, including heavy-duty gloves for cleaning instruments, and eye protection when there is a risk of splashes, especially while diluting concentrates.
Storage
Keep products in their original closed containers, away from heat and out of reach of children. The safety data sheet of each product describes its hazards, first aid and storage in detail.
Riviera Pharma
How Riviera can help
Meet the ingredients
ProfessionalA scientific summary for pharmacists and physicians; references are published and verified on PubMed.
CDC guidance (Rutala 2008; Kohn 2003) stresses use of germicides at the label concentration and contact time, prior cleaning because organic soil inactivates many agents, and appropriate PPE and ventilation for chemicals such as glutaraldehyde. Chlorine releasers must not be mixed with acids or ammonia.
References
- 1Rutala WA, Weber DJ; HICPAC. Guideline for Disinfection and Sterilization in Healthcare Facilities, 2008 (update 2019). Atlanta: CDC.
- 2Kohn WG, Collins AS, Cleveland JL, et al. Guidelines for infection control in dental health-care settings - 2003. MMWR Recomm Rep. 2003;52(RR-17):1-61. PMID 14685139
- 3McDonnell G, Russell AD. Antiseptics and disinfectants: activity, action, and resistance. Clin Microbiol Rev. 1999;12(1):147-179. PMID 9880479
Found it useful? Share it with someone who cares
Reviewed by: Riviera Pharma Scientific Affairs Team. General professional information; it does not replace national infection-control rules, the product label or the safety data sheet.





